How To Level A Trampoline: (8 Ways)

How To Level A Trampoline

Up to 40% of all trampoline injuries are a result of falling off the trampoline, which is why you need a good level jumping surface. Although a horizontal surface with no slope can’t prevent all the trampoline accidents, but it can help reduce them. Unlevel trampolines are more dangerous. What is the best way to level a trampoline?

The best way to level a trampoline is with a set of leveling blocks. You can use standard leveling blocks for this process; differences in the number of legs and the way your specific trampoline is constructed can cause a wobble when you’re done. Get a kit with interlocking blocks instead of guessing and checking a dozen times.

How To Level A Trampoline On A Slope

If you are setting a trampoline on a slight slope, the easiest way to level it is to dig down in the dirt for the uphill legs.

Setting these legs into the ground gives you an extremely sturdy and level trampoline frame.

The steps below is the process to level a trampoline on a slope:

  1. Measure a straight line from the low end of your slope to the point where you need to dig down on the upside of the slope.
  2. Mark or write down exactly how deep and wide you need to dig to reach a level spot for the leg or legs that will sit there.
  3. Dig away a wedge of dirt, leaving plenty of room for trampoline legs.
  4. Set up your trampoline.
  5. Fill the area back in and plant something like grass or native wildflowers to help prevent future soil erosion.
  6. If you have any areas where the ground is still uneven, you can use leveling blocks to create a uniform, stable surface for the trampoline legs along the slope.

How Level Does A Trampoline Need To Be

A trampoline mat that is not in use should be perfectly level. It is essential to ensure your jumping surface isn’t tilted in one direction to avoid accidents.

Using a sloped trampoline mat can lead to slips and falls, so pre-leveling the ground or adjusting the legs with appropriate leveling blocks is a significant and necessary step for trampoline installation.

You can use a standard level, such as you might find at a construction site, or use it to check whether paintings on a wall are set correctly.

All you should need to do is place it on the mat near the center, and check where the bubble in the liquid sits while you are not on top to distort the surface.

Alternatively, you might want to use a laser level to check for inconsistencies on a larger trampoline.

Trampoline Leveling Blocks Amazon – (Tri-Lynx 00015 Lynx Levelers)

Tri-Lynx 00015 Lynx Levelers
  • Lynx Recreational Vehicle Leveling Kit, 10/Pack
  • Modular designed levelers not only configure to fit any leveling function, but they also withstand tremendous weight
  • To use: simply set them into a pyramid shape to the desired height that the RV needs to be raised and drive onto the stack
  • The levelers can also be used as a support base for other stabilizing equipment

Last update on 2024-06-21 / Affiliate links / Images from Amazon Product Advertising API

The best leveling blocks for trampolines on Amazon are the Tri-Lynx 00015 Lynx Levelers.

These bright orange blocks come in a ten-pack that is easy to see in any weather and incredibly simple to use.

The unique shape of the blocks allows them to link together like children’s building blocks, so they don’t slide out of place.

Plus, Tri-Linx is incredibly sturdy and durable because they are built to handle weights up to the level of a large camping RV.

Using a modular system means raising and lowering individual legs on your trampoline to different levels as needed.

The lightweight blocks only weigh a few ounces each so that anyone can level a trampoline without help.

To learn more about Tri-Linx Levelers, click here.

Skywalker Trampoline Leveling Kit

Ultra-Fab Products 48-979051 Ultra Leveling Block
  • Interlocking blocks are stackable in a number of configurations
  • Stack in different ways to achieve a perfect leveling of your RV
  • Blocks measure 8.3125" x 8.3125" with a 30,000 lb. weight capacity
  • Comes with a handy carrying/storage bag

Last update on 2024-06-21 / Affiliate links / Images from Amazon Product Advertising API

I recommend Ultra-Fab Products 48-979051 Ultra Leveling Block for your Skywalker trampoline.

These bright blue blocks match many trampoline pads. You get the complete kit with ten blocks and an easy carry bag to make transporting and setting up your levelers a breeze.

Ultra Levelling Blocks fit together in many different configurations under the legs to create an ideal trampoline surface.

Moreover, they can handle up to 30,000 lbs so that you can level the biggest trampolines and multiple jumpers with ease.

Grab a set for your uneven trampoline by ordering right here.

Springfree Trampoline Leveling Kit

Valterra A10-0918 Stackers Multi-Use Leveling Pads
  • RV LEVELING PADS: Function as a multi-use leveler, jack stand, and tongue wheel support for a versatile addition to your tool kit
  • RAMP FUNCTIONALITY: Attached easy to grip handle acts as a transition between pads for a smooth ramp
  • STACKABLE DESIGN: Pads lock together tightly for extra stability and dependable use with heavy loads
  • STRONG CONSTRUCTION: Hold up to 40,000 lbs. gross vehicle weight on a firm level ground or 10,000 lbs. per wheel
  • COMPACT SIZE: Each pad measures 8" x 10" x 1-1/2" and the pack includes 10 pads

Last update on 2024-06-21 / Affiliate links / Images from Amazon Product Advertising API

Leveling a Springfree trampoline on uneven ground is fast and simple with Valterra A10-0918 Stackers Multi-Use Leveling Pads.

The unique top of these interlocking revelers allows you more options for where to set the trampoline legs.

Better still, they come in 4 and 10 packs, so you can level several legs or just even out one depending on your needs.

The ramp tab on the side of each Valterra Stacker lets you slide the legs into place without lifting.

Additionally, the compact size of these leveling blocks means you can fit them in smaller gaps, so your trampoline stays stable.

Check out Valterra Stackers Multi-Use Leveling Pads on Amazon by clicking here.

Camco Leveling Blocks Trampoline

Camco Fasten XL 2x2 Leveling Blocks Set
  • AMERICA’S RV LEVELING BLOCKS: Choose FasTen XL interlocking leveling blocks to fit your RV's unique needs. These (10) gray camper leveling blocks by Camco stack to your desired height for customizable support.
  • PREMIUM INTEGRATED HANDLE: Easily carry and transport these camper leveling blocks with the premium integrated T-handle. Just lift the handle to carry and twist it down to securely lock the camper blocks together for storage.
  • QUAD-GRID EXTREME LOAD BEARING DESIGN: Experience superior leveling with this RV essential. Each XL polymer block measures 10 1/2" x 10 1/2" x 1 1/2". Structurally engineered for maximum stability, these RV stabilizer blocks are a camper must-have.
  • COMPATIBILITY: Use XL Camco leveling blocks with single wheels, double wheels, hydraulic jacks, tongue jacks, stabilizer jacks, fifth wheel jacks, and tandem axles. For best results, make sure to use a stack height of 4 1/2" or less.
  • PATENTED DESIGN MADE IN THE USA: Get superior leveling support with these Camco leveling blocks, proudly manufactured in the USA. This patented RV leveling kit is built with premium materials for unparalleled durability.

Last update on 2024-06-21 / Affiliate links / Images from Amazon Product Advertising API

The ideal Camco blocks for leveling a trampoline are the Camco Fasten XL 2×2 Leveling Blocks Set from Amazon.

I especially like the secure T-handle carrying system that helps you move the whole stack around as you work to create a level surface.

The handle screws down tightly, so the set of leveling blocks goes where you want it most.

The openness of the durable plastic design leaves plenty of room for dirt, sand, or even plants.

Moreover, this modular stacking system offers customizable heights based on your needs.

Have a set shipped to your door fast by clicking here.

How To Level A Trampoline On Grass

Most lawns are pre-leveled before the grass is seeded or sod laid. However, for older lawns and areas where grass grows naturally, you may have more work to do before you can set up an outdoor trampoline.

Fortunately, leveling a trampoline on uneven grass is relatively straightforward.

Below is a quick reference guide to help ensure your outdoor bouncer sits flat on the grass.

  1. Mow the grass down as short as possible. Doing this will help you determine where the ground dips or rises so you know where the instability is and can adjust the terrain accordingly.
  2. A laser level is beneficial for leveling trampolines in the grass because it can provide precise measurements of dips and small hills.
  3. Anywhere you have little bumps or small mounds, dig the excess dirt off with a shovel and then compact the soil below with water and a roller.
  4. Fill them in wherever you have dips and repeat the water and roller process to level the area.
  5. Add grass seed anywhere you’ve created a bald spot to fill it back in. Then water the seeds.
  6. Set up the trampoline on the smooth grassy area.

How To Level A Trampoline On Concrete

Concrete should always be level if it were laid by professionals. When you pour the liquid, it naturally settles into a flat plane within the bounds you’ve set for it.

Sadly, ground movement, temperature fluctuations, and poorly laid concrete can crack and change over the years, leaving you with a problematic area for a trampoline.

Although concrete pads are not ideal for trampolines because of the higher risk of movement and injuries, I have described the process for leveling your trampoline on the concrete below.

The easiest way to get a perfect level surface is to adjust the concrete by re-pouring in that area.

  1. Clear away any debris or broken chunks of old concrete.
  2. Mark out the space where your trampoline will sit.
  3. Using wooden 2×4 boards, create a frame around where your new, level concrete pad needs to sit.
  4. Calculate and buy your concrete. I recommend Ardex because it’s easy to work with and self-leveling.
  5. Mix concrete and pour to fill the area. The liquid concrete will level itself and cure flat if you’ve followed the manufacturer’s directions.
  6. Vibrate the liquid before it sets to release bubbles.
  7. Smooth the surface and let it cure according to the directions.
  8. Place your trampoline on your new, perfectly level concrete.

How To Level A Springfree Trampoline

Springfree trampolines are known for their incredible springless design and well-tested safety features.

It wouldn’t make much sense to take ‘the world’s safest trampoline’ and set it up on a slope or uneven ground where it increases the danger of jumping.

After all, people buy these trampolines to prevent accidents.

The Springfree trampolines are naturally level when set on even ground. Setting a Springfree trampoline up, so it is level is no more difficult than other styles.

Below is the process to level a Springfree trampoline:

  1. Use a level or smooth, even board with a level attached on top to measure the ground in the area where you plan to place the trampoline.
  2. Remove any dirt, rocks, or debris that would mar the level surface of the ground.
  3. Dig away any small rises.
  4. Use a set of leveling blocks for any dips or gaps to provide a consistent, level base for the legs.
  5. Set your trampoline and safety net up on even ground and enjoy a safer bouncing experience.

Helpful Tips To Know About How To Level A Trampoline

A level trampoline is a much safer trampoline because gravity will naturally push jumpers downslope, even if it’s only a little bit at a time.

This can lead to more falls and injuries than a perfectly horizontal jumping surface.

Here are some helpful tips to know about how to level a trampoline.

  • Sliding and falling aren’t the only possible accidents caused by unlevel trampolines. An unbalanced bouncer can tip more easily when you put weight on the downslope end.
  • Depending on the state of your ground and the number of legs on your trampoline, it may be necessary to adjust more or less for each leg. It is easier in some cases to level the ground below first instead of trying to use levelers for the trampoline. However, you should use whatever methods best suit your trampoline area. Combine leveling blocks, digging, and other options together where necessary to level your bouncing surface.
  • Another great way to level a trampoline is to dig down in the ground and create your ideal space for a ground-level trampoline. Doing this means there’s no drop below the trampoline if someone goes off the edge. You can dig a proper diameter hole. Then go a few inches deeper than you need. Backfill with gravel, and then play sand to make a perfect, level, well-drained, in-ground trampoline.
  • A good set of trampoline stakes and anchors will keep that trampoline level and on the ground when the wind picks up. It’s a smart idea to ensure your trampoline is staked down with appropriately long, corkscrew-shaped stakes for better security.

Final Thoughts

Before you ever assemble your trampoline frame, it is essential to level the area you plan to place it.

When ground or cement leveling isn’t an option, you can sometimes dig into a slope to create level footing.

However, a good set of modular leveling blocks can also help make a stable mat with no downslope area to accidentally slide toward when you land.

No matter how you approach it, knowing how to level a trampoline is essential.

Drew Thomas

My name is Drew Thomas and I’m the creator of Fun In the Yard, your one stop site for all your outdoor games, sports, party activities, outdoor gear, and lawn & gardening tips.

Related Posts